Counting matching models…
I am using M3x10mm SHCS for this design. You should be able to use longer (maybe 20mm?) since it threads into a thru hole.
Print approx. €5.33–€6.52 excl. taxPreliminary estimate for PETGSource material: PET
Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…
Very simple bracket to allow m.2 2280 drives to fit on the Datto ALTO 3 V2 board, which is designed to only hold 2260 m.2 drives.
This is a hard drive or SSD carriage for the Datto S3X1 (SSDX) mini pc. 0.4mm nozzle 0.2mm layer height 50% infill 4 perimeters 5 layers top and bottom The chassis requires two M2 screws to secure the carriage. You'll also need 4 hard…
Can use M3 nuts and M3 bolts from 16mm to 30mm in length. The mesh is from the slicer settings: set the top/bottom layers to 0, infill at 6.5%, infill line multiplier at 3. Adjust based on preference.
This is printed out of TPU for a softer foot. I use M3 x 10MM Socket Head Cap Screws.
Materiale: arricchito carbonio, ABS, PETG alte temperature Viti: numero 6, M2x6mm…
If you like this model please like and download, it helps motivate me to make more! Please consider using the amazon affiliate link bellow for the required hardware! The spacers Raises the Datto Alto V3 up 14mm to increase airflow or make…
Replicated the sheet metal bracket that holds the 2.5" drives in the Datto MiniPCs.
This is a printable case for the board from a Datto ALTO 3 V2. If for some reason you have one of those boards without a case, this is a functional equivalent of the original case, but made to be 3D printed. I see that more recent Asrock…
Many units that I have for sale are missing part or all of the OEM case. I designed this as a very compact and simple full replacement. You only need: 4x m3 nuts 4x m3 screws at least 14mm long I plan to build off of this to make versions…
This uses the OEM screw size of m2.5 x 40mm. This does NOT have capability for holding 2.5" drives. That version is in progress. To get the mesh pattern from the photo, in your slicer: Remove the top & bottom layers Infill of 15% Infill…
This uses a screw size of m2.5 x 20mm and are much easier to find than the 40mm versions for the original. This does NOT have capability for holding 2.5" drives. That version is in progress. To get a mesh pattern like my other bottom case…
Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…
