Improved 1U Rack mount WOPR LEDs Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1U Rack mount WOPR LEDs Enclosure. Uses three 8x8 (x3) LED Matrices from AliExpress
- Rating
- 4.5 / 5
- Likes
- 33
- Downloads
- 204
- Makes
- 3
- Views
- 3,140
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
This is exactly the same concept and code as outlined in aforsberg's project, just with a slightly larger opening for the LED matrices in order to fit the ones I bought from AliExpress (https://www.aliexpress.us/item/3256805668841965.html). (Three of these are required.)
I remixed the original 1U panel and made the thickness the same as the modules (~10mm).
Also, this one is in two pieces that attach together without glue by sliding the keyed parts into each other. I used hot melt glue to hold the matrix in place.
Desoldering one of the right-angle headers is required, either wire the connections in directly or put headers sticking straight back. The other boards can be connected with the existing right-angle headers by bending them to ~180 degrees and soldering into the output of the previous board.
Please note, following from the original 1U blank, the screw holes are too small for most standard rack-mount screws. This device doesn't have much weight, so it's possible to secure with zip ties or wire ties without any issues.