Edifier MR3 Desktop Speaker Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
10 or 5 degree incline. Slot is 19.75mm wide and 131.25mm long. Inclined area is 142.75 mm long and 125mm wide.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 352
- Makes
- 5
- Views
- 1,887
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
Couldn't find any MR3 specific stand so decided to make my own.
The V4 right one is the one I recommend, it is about 10 degrees tilted up.
The V2 left one is about 5 degrees so it is barely any incline.
Would probably work for other similar sized speakers as well.
Slot is about 19.75mm wide and 131.25mm long.
The area where the speakers sit is about 142.75 mm long.
125mm wide from edge to edge, and about 110mm wide from the edge of the left slot to the edge of the right slot.
Last picture is the 5 degree one all other pictures are the 10 degree one.
I printed it flat with 10% gyroid infill.
I can add more angles if anybody would like them