1 / 5
Prusa Mini Light bar
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Light bar upgrade for Prusa Mini
- Rating
- 5 / 5
- Likes
- 76
- Downloads
- 144
- Makes
- 2
- Views
- 2,353
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Light bar upgrade for Prusa Mini. It is using LED dimmed and backlit button as power switch. The light intensity can be changed by pressing and holding the button.
Print settings
All files are in correct orientation, supports are not needed.
- Layer height 0.1 mm
- Enabled avoid crossing perimeters
- Disabled fill gaps
- Gyroid fill pattern
- 15% fill density
- PETG
Required parts
Links below are aimed at Czech eshops, but you can probably found the same parts on ebay, aliexpress and other worldwide eshops.
- 2x Arm, 1x Core, 1x Core left, 1x Core right
- LED channel of size 23.5 x 10 mm
- LED diffuser
- LED dimmer
- 20W LED strip
- 12V power supply with a minimum power of 15W
- Switch + 910 Ohm resistor for LED
- 3x M3x16, 1x M3x18, 2x M5x40 screws
- 4x M3 square nuts
- Cable
Assembly
