1 / 1
1020 Tray Germination Humidity Dome V1.0
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed this frame work to make a humidity dome for my 1020 trays.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 953
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Need to print 3 ribs, and minimum 2 spars (recommend 4 or 6). After you print the frame simply cover with plastic wrap, or any other clear plastic. You can add a few spars on top to hold the plastic on, or tape it on, or whatever you choose.
The ribs are too large to fit on an MK2/MK3 bed, so I cut it with a tenon. Simply glue them together after printing. I used super glue (CA Glue) but just about any water resistant glue would work. I've included to the full rib for other larger printers, or if you'd like to cut it to size yourself.