UniFi E7 AP legs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A compact pair of legs to keep an UniFi E7 (Ubiquiti Enterprise 7) AP in the vertical position.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 104
- Makes
- 0
- Views
- 403
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
A basic but strong leg design to keep the big&heavy Unifi E7 in a vertical position.
They attach with M4 16mm screws. Some minimal cable routing provided through the leg.
The OpenSCAD source is included if you need to make modifications: you can make them bigger/smaller/wider/etc by simply changing some of the predefined parameters.
Print two of them, and for aesthetic reasons you might want to print the second leg mirrored (so you keep the cables on the inside), but functionally it doesn't matter, it works in either orientation.
It prints without supports and for material I recommend PETG or similar, as the UI APs run relatively hot (too hot for PLA).