Counting matching models…
I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…
I found a well designed jig on the internet but because I already spent too much money on jigs and tools I built one myself. For your convenience I've included all Fusion 360 files so you can make changes to the design. To make…
I ended up slightly modifying the slots on the featherboard, as well as designing new knobs and slides, all of which fit common-to-the-US 1/4-20 UNC hardware. Use lock nuts in the knobs and standard 2-inch-long hex bolts in the slides.…
A remix of a simple wall mount bracket for the Deco XE75 with the model number on the front for easy identification
Because I broke my tablesaw insert plate, I needed to design this replacement part. I made it as accurate as possible and in two parts so it fits on the build plate. It is not a ‘zero clearance’ version, but as the pictures show a…
Check the profile to download the full set. Subscribe to not miss out the next one!
The miter slot on the True-FLEX featherboard didn't fit my dwe7485 so I took the exact dimensions of the crosscut miter that came with the saw and made a compatible miter slot for the board. Uses m6 screw and nut
This part is used to adjust and secure scale indicator of Dewalt DWE7492 table saw and avoid plastic distortion of original indicator when securing screws Remix from https://www.thingiverse.com/thing:4602164 Part has been redesigned to…
The popular Dewalt dwe7485 tablesaw has a 2.5" dust port (2.3" ID) that was WAY too big for the 1.5" OD hose I had standard on my ShopVac. Hardware stores didn't have the correct reducing couplers so I designed my own. There is an…
Replacement cap for Scale75 17ml paint bottle, featuring an internal sphere for improved sealing and leak prevention.
A silhouette of BMW X5 E70. For bigger prints cut it and then glue or weld together.
Blind plate for BMW X5 E70 center armrest. Is made to replace the oem part 51169115083. It doesn't clip in like the original part, but the printed part fits very firmly in place
My son wanted to sell his Beyblade stuff, and one leg of this arena was missing, and I thought lets waste time to remodel that thing. Lucky me one of the legs remained and I could use it as a measure model. It fits perfectly and was fun…
This is a replacement cap for Dell Latitude E7440 stick pointer.
Thanks to the guys over at THERPF. I was able to have a play round with this Pepakura file and a blend of models from Garys Mods. It still needs some work, but is a great start to a full suit of first order armour. Cheers Jace
Praetorian Guard armor the mandalorian s3e7 + helmet made by https://www.printables.com/@ccary17_761396
Schuko Socket Plug protector (if no grip use M4 screw to remove)
Recreated in Fusion360 based on original design by @80am33. Included a version with names, so you can customize it in Fusion360. Enjoy!!! Recriado no Fusion360 baseado no design original do @80am33. Inclui uma versão com nomes para que…
These are simple brackets that fit over the feet on the DeWalt DWE7485 / DCS7485. They allow you to easily & securely mount the saw in place as I found the original mounting holes to be very awkward as they are at an angle. Are a ver good…
This cover replaces the large plate that is supposed to hide the cables under the table. You can print it flat but it should also be possible to print it standing.
This honeycomb cover helps you to store your cables under your Flexispot desk. It uses the remaining threads on the screws from the frame. The model is quite large and is not printable for everybody. You need a bed to support 290mm in one…
This adapter allows 1 vacuum to connect to both the main dust port and the blade guard dust port at the same time.
Biete hier Stapelbare Kisten mit und ohne Magnete im Boden für 18ml und 200ml Flaschen von Vallejo oder ähnlichen Herstellern an. Die verwendeten Magnete haben die Maße 30x5x2mm I am offering stackable boxes with and without magnets in…
Originally published here: (WIP) Motorola Moto E7 & E7i Power xt2052 case by tato_713 - Thingiverse This case was designed for the phone E7, E7 Power and E7i Power. It could be compatible too with the E7 Plus, but this one has a slightly…
I created this to allow for print on my smaller printer (Bambu P1S) and to then assemble with screws. Added a solid bar across the middle with 2.5mm holes for m3 screws to thread the pieces together or a narrower bar to use an m2 screw…
Esta flauta esta diseñada para la practica de la digitación. No se puede soplar y por tanto no produce sonido. Con el COVID no pueden estar todos los chicos y chicas en la clase soplando a la vez. Lo mejor es imprimirla en vertical. No…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Customized version of https://www.thingiverse.com/thing:1246651 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=1246651 Print instructions Customized using the following options: LargeEndMeasured =…
Wanted to increase the rip capacity of me DWE745. Instead of buying original, and costly, replacement rails and joining i decided to design them myself. I printed them upright (hence the max 250mm) on my Bambu Lab X1 Carbon using eSun…
supports needed under the clip
Cutting Guide Replacement for the original guide of the Babyliss E769E I recommend printing in PETG and 0.1mm layer height and up-side-down with tree-support (i used Prusa Slicer 2.6.0 Alpha 6, but Cura is also fine) I printed in 0.2mm…
I've seen a few fence spacers but none that would really work with the Dewalt DWE7485 A common issue I was having with clamping offcuts to the fence was the fact there's a push stick and not really too much room on the fence to clamp…
Pring PetG 0,2mm structural 0.4n infill 15% gyroid dimensions The plug is designed for cable glands with a diameter of 7-14mm. version for 8-12mm cable here cable gland plug m20×1,5_ver_1_cable8-12mm (plug diameter 10,8mm) od autora Očko…
Simple and cute quick printing case for the Heltec E213 eInk node. There's even a little room for a battery if you're so inclined. Whipped this together for my desk and though I would share if anyone else with the same node wants it...…
Quick printing wire strain relief for wire antennas. Center hole for connecting stuff. Has a gentle curve as to keep wire from de-sheathing. I kept de-sheathing some thin wire with a simpler strain relief so whipped this one up... The…
you might have to drill out the holes for the M2 screws,
I love the original Morse Code Paddle / CW Key that K6ARK made. I was trying to get the contact distances closer but had trouble with the pressure from my plastic springs not being enough. With magnetic returns I was able to get the…
A wiec projekt magazynu z ogniw LG NCM model LGX E78 jest już zakończony tak więc finalna wersja projektu jest już gotowa do pobrania. Kilka spraw: Projekt jest dedykowany do zmieszczenia w nim 11 ogniw (jest to system 14s11p), wysokość…
I designed this cable chain for my Flexispot E7 standing desk with tinkercad. The main idea is to provide an easy to use way to organize multiple cables (e.g. power, monitor, speakers, …) in one chain. Compared to the classical cable…
This is a backpack hanger designed for the Flexispot E7 desk. It cleverly utilizes the space between the tabletop and the legs, attaching via friction for a secure hold. The design is optimized for printing on its side for maximum…
A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…
A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…
Simple case for Motorola E7 Plus made to be printed in TPU filament. Filament : TPU (Mandatory!!!) Layer Height : 0.1mm Can be anywhere from 0.5 to 0.25 depending on your printer, filament, and other variables. Speed : 30-50 mm/s…
Optimized for the MSI GE73 Raider. Do a mirror flip to use it on the right side of your laptop. PLA works but i recommend to print it in PETG for a longer use.
This is simple phoneholder for BMW X5 E70 to use with Xiaomi Redmi Note 9 Pro. I will soon add Fusion360 file so you can easily modify this model for you needs and also photos from car. Maybe someone will make it parametric this usable…
Feet to lift the laptop and improve cooling. The rubber feet on the laptop sit in the groves and help keep the feet in place. I think the angle is ~5 degrees.
Stack able box send me a coffee @ http:\\ ko-fi.com/capcoffee78
Recently had to update my router and decided on a mesh system. I needed one node in my garage, but didn't want it low where it could get damaged, so I designed a mount to be able to mount it to the roof. The router/node fits inside the…
TL;DR This OpenSCAD model generates 3D printable dust and dirt protection covers for CEE7/Schuko power outlets. Available in four shapes—round, square, hexagon, and octagon—the design is fully customizable for FDM 3D printing. Perfect for…
This model adds the hidden momentary button to remix of ttt - gate7_1_6x2 Magnets Power model which begins the dialing sequence in Spradlinb's youtube video. UPDATE this design uses two 6x2.75 disc magnet using (6.2x2.8) and reducing the…
The Happymodel Moblite 7 has a battery holder for 2S, the walksnail model is 1S and the battery holder doesn't fit properly. I designed this TPU holder for 1S batteries around 400-550 mAh. I tested many batteries, AUline 450, GEPRC 530,…
Here's yet another option for a desk mounted headphone holder, this time designed to fit the existing mounting holes of the FlexiSpot E7 series control panels. The top plate of the headphone holder is sandwiched between the top of the…
Has your child ripped off the handle to the 3rd row jump seat in an amazing feat of strength and then immediately lost it? Do you not want to pay $60 to replace it? Then you're in luck. Here's a set of matching handles used to fold the…
I made as my first big 3D printing project, since the Sige7 does not have a case that fits the assembly with cooler. There is a lot of things to modify and fine tune, but it works well for me. The CAD file is also available.
Filamentspool for refill (nicht verwirren lassen 9e7( 9Eck7mal) ist nur meine Modellbezeichnung zur Unterschiedung)
Would suggest printing this with 100% infill. I have personally tested this with CF PLA.
Dodaję szablon do robienia otworów w ogniwach LG NCM E78, dzięki niemu łatwo utrzymamy symetryczność otworów, oddzielnie dla bieguna dodatniego i oddzielnie dla bieguna ujemnego, ogniwo zawsze płaską częścią do góry jak na zdjęciach. Ja…
XXXC Corolla badge for TE72 and KE70 corolla sedans with quad headlight grilles. Uses M6x1.0 bolt.
TEQ strut tower cap for Ke70 corolla. uses original rubber cap inside model with 3x m2 grub screws to hold it in place.
Iconic Movie Villains - Se7en - John Doe - 1995
MICROSWISS DIRECT DRIVE MK8 HEROME7 GANTRY ADAPTER Allows MK8 to fit on microswiss direct drive with herome 7.
A replacement backplate for the intel DH57JG motherboard.
QMX Buddy Back Case non-destructive replacement for rear case panel. Quick to swap with existing screws to allow room for your mods. Use your slicer or cad to poke holes in where you want them. Maintains the nice aesthetic of the QMX. I…
I designed this phone stand for the iphone 7 of my mother in law (90 yrs old). Features : phone stand stability : not too high (lower center of gravity) + wide surface to ensure it doesnt trip over phone angle : suitable for video…
a mount for the Zenchansi e7082VM VTX VTX: https://de.aliexpress.com/item/4000938942385.html
The model consists of two parts: The sleeve that interfaces with the flashlight body and the cone itself. Print the sleeve normally. Print the cone in vase mode. Permanently attach the two parts together using CA glue. The model was split…
a mount for the Zenchansi e7082VM VTX and TBS Crossfire Nano RX VTX: https://de.aliexpress.com/item/4000938942385.html RX:…
Just a quick adapter i sketched up for the new bigtreetech eddy probe to suit Hero Me Gen 7 Universal Base. Fits between my Anycubic Vyper Gantry Adapter and the Universal Base but should work with other gantrys etc as well. Please leave…
Remixed model have higher rim to protect screen or glass protector :)
I resized the slot to .1mm this should make it much closer to being zero clearance. Increase the walls in your slicer.
osVAC Y-Adapter for the DeWalt DWE 7485 table saw, for the lower vacuum port. osVAC Y-Adapter für DeWalt DWE 7485 Tischkreissäge, für das untere Absaugrohr.
My headphone headband snapped after 1 year of use. Instead of throwing away the perfectly useful electronics I made this replacement model. It works pretty well. I think for a V2 I would try to add in some TPU padding for where it sits on…
I bought a replacement plate for my GE 731K microwave and it turned out that the protrusions under the plate were higher than in the original. So I had to improvise. The plate that I bought is DE74-00027A and was supposed to be a direct…
first time i tried to create keycap for keyboard and shape and height looks identical. i used gpt's codex to create letter versions for turkish layout. printed with p1s and ams at 0.08 layer height with 0.4 nozzle. turn the model 45*50…
Als ich meine Tischkreissäge geliefert bekommen habe, war das Handrad zum Verstellen des Parallelanschlags kaputt. Kurzerhand habe ich es nachgebaut und gedruckt. Es funktioniert tadellos. Passt für: DWE7485 DWE7492 (in der Theorie sollte…
Ewrf e708TM3 30.5mm slot which can be mounted onto standart stack 30.5 x 30.5mm. Secure with zip ties. !!! DO NOT USE PLA !!! Print instructions Category: R/C Vehicles Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No…
gantry mount for HeroMe7 with BTT Hermit Crab 2 (CAN)
Want to Support me? Post a Make Give it a Like PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- About: This model is a wall mount bracket designed specifically for the TP-Link XE75 Wi-Fi router . It…
This is a mesh between Desk Organizer 2.Wide and my iPhone 7 Plus w/SwitchEasy Glass case. Hope it works for everyone. Need to use the stock Apple Lighting cable. Print Settings Printer: Folger Tech FT-5 Rafts: No Supports: No Resolution:…
Bracket made of PLA, the design has a fix 10 deg angle pointing down . PLA works fine, print it in the shown orientation to get the right proper of the clip. The design has 4x Magnets of 6mm diameter x 1.7mm height but the design is tight…
I love my new flexispot desk, but the dangling wire from the controller was bothering me - so I made some cable holders! These are made for the E7 pro, but works with any steel/iron surface and a φ5.2mm cable. You'll need one φ16mm x t5mm…
VTX: https://de.aliexpress.com/item/4000938942385.html RX:…
Should fit to installation hole of E7. You may edit it for your needs (perhaps customize it to fit another chartplotter, gopro, phone, etc).
This is Tripod Mount Adapter for the Flir Ex and Exx series. It straps to the handle with a piece of double sided velcro. This fits: E4 / E5 / E6 / E8 E53 / E75 / E85 / E95 E54 / E76 / E86 / E96 Step files attached.
I made it for spots where the AP has to sit in a tight space or a compact enclosure and laying it flat or wall-mounting isn't an option. It bolts straight to the four mounting holes on the back of the E7, so once it's seated it stays put.…
I wanted a frame to replace the stock whoop frame for my Moblite7 WS frame, when I eventually broke it. I wanted it to be quick to print without supports and have no issues due to layer adhesion on small sections like most printed whoop…
I'd print as oriented, at your preferred infill using tree supports on the clip only. the body itself should be printable without supports
Pictured is the pegboard version also available on my page. Designed to elevate the router from the floor, this mount was printed without a bottom panel to enhance airflow and cooling efficiency. I included models with wire exits on the…
I couldn’t find an STL to connect my DeWalt DWE7491 table saw to my DeWalt DXV09P shop vac, so I made one. This adapter helps improve dust collection by creating a solid connection between the saw and vacuum hose. Designed while learning…
VTX: https://de.aliexpress.com/item/4000938942385.html RX:…
Stand for speaker Yamaha NX-E700
učitelé: - Ing. Bronislav Gazda
Small thumb latch / retain clip for the originak portafilter that comes with the UFESA CE7240. This is the little pivoting piece that goes on the end of the portafilter handle and is used to hold the filter basket securely in place, when…
Lens Cup for Akaso Brave7 camera Recommended: Print with -0.05 horizontal expansion
Crudely added a dust shroud to the user end of the tablesaw to help reduce the amount of dust that is thrown out of the gaps. Checkout the original model for the rest of the parts.…
IMPORTANT: while this part fit perfectly for me, people in the comments report it's too long. It was printed on my old printer that perhaps wasn't well calibrated, so if it doesn't fit please try the remixed version that's a little bit…
Ke70 door lock popper surround to keep the poppers from rattling around in the doors when not running full height door cards that hook over the top edge of door.
"Welcome to the family, son!" Bring the most cunning member of the Baker clan to your collection with this high-fidelity, static-pose figurine. This model captures Lucas in his human form, emphasizing the disheveled, greasy, and…
The vacuum tube retaining clip get broke. I Printed it and it works great. Material I used was ASA Black. Please keep the model orientation because of the force orientation. Mayby you need to correct the 3 pins to the tube clip. Hoover…
