Club Mace for cosplay
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A long handled club mace I designed that could be used for cosplay..
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Share Alike
So I got bored and wanted to see how difficult it would be to design a ‘modular’ mace (and I always kinda wanted one)
It turns out, not that difficult to be honest.
So, I printed it, painted it and now its on the wall at home along with my war hammer.
It's designed for a 2.5cm/25mm diameter handle - Adjust the length to your preference - I made mine around 60cm/600mm.
The tolerances are pretty tight, so you might need to sand them down ever so slightly but it all fits together quite well.
Print 4 x Teeth.
Print 1 x Everything else.
25% infill / 0.4
Designed in Tinkercad.
Printed on a Flashforge Adventurer 5M.
Note:
If you're intended on actually hitting people with this, then I strongly recommend you print the teeth in TPU because those teeth are SHARP.
Seriously, be careful.
Otherwise, Enjoy!