1 / 7
[IKEA BROR/SKADIS] Back Mount for BROR shelf of SKADIS w. original IKEA screws — image 1
1 / 7

[IKEA BROR/SKADIS] Back Mount for BROR shelf of SKADIS w. original IKEA screws

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Made remix with small modifications so I was able to use the included screws from the IKEA products.

Rating
4 / 5
Likes
16
Downloads
64
Makes
1
Views
528
Reviews
1

Updated at source:

Model information

Category
Garage
License
Creative Commons — Attribution — Noncommercial

In addition to the IKEA screws I needed only M4 square nuts (according to DIN562), but M4 hex nuts (type DIN934 or DIN439) should fit too. 

Resizing of holes in the posts with a 6.5mm drill necessary for better fit. Pressfit of M4 square nuts, for easy assembling into model screw the nut into M4 bolt before.

Note: If you don't have enough screws left from the by-pack kit, you can order them for free as spare parts on the IKEA website. Just use the spare part number depicted in the manual.

Printed with EASY PET-G Filament by Fiberlogy.

Tags