Counting matching models…
Press fit semi-circular cover for inner corners of Ikea BROR storage system. Can cover wires or be used as a diffuser like I am Diffuser Print Settings: Clear PLA Thinner layer lines = less transparent/better diffusion
Universal steel sheet holder for 10 sheets. Meant for IKEA BROR but can be installed on any vertical bar that contains matching mount holes or is made of wood. Advantages: can be operated with one hand good visibility of plate types…
FR (English below) Une solution assez économique pour surveiller en dehors de chez vous ou enregistrer vos prints avec votre imprimante installée dans une étagère Ikea BROR. Une caméra abordable, réglable en position grâce à votre…
This is a quick and dirty spoolholder for the Ikea bror underside reeinforcements Category: 3D Printer Accessories
Found that I had to make a small adjustment to the remix from Maenuwa to fit the holder to my Bror shelf. (original design by Joshua3D )
Paper towel holder for IKEA Bror. I'm using it on 190cm high Bror variant. Printed from PETG, no supports. Mirror second part in slicer or use provided 3mf file. Additionally needed: 53cm (or close) long, 20mm diameter wood or metal rod…
Printed in 3 parts, no need for glue, just insert right and left in the center part. Use the holes on the left and right with screws and bolts to attach the sides to the BROR Shelves.
A remix of ExpiredTapWater's mount, modified to align with the holes for a 56x56 SKADIS board and the BROR's side panel. Holes are sized for M4 heat-set inserts. Main modification was to move the hole a few mm to the right to align with…
If you need to make Ikea Bror shelving system higher than default 190 cm. You need another set of Ikea Bror legs, cut to the size, to put on top. If you want to make it much higher, it's best if you use second “X”-rod mounted to the top…
The IKEA Bror shelving system is super flimsy when not bolted to a wall (which is not always possible). Using it for a 3D printing enclosure is a popular choice, so we need things to secure it. One of those things is tablet stops to…
Pretty simple - We wanted to have my tools close by and organised so we copied the IKEA SKADIS pegboard and redesigned it to mount to a BROR shelf. There are two kinds: CORNER sections - These are for a single BROR shelf. Add them to each…
UPDATE (12/04/2024): I've been using these caster mounts for about two months now with about 125 lbs. of weight on the shelf, and so far they have held up well. I have attached two pictures of the shelf with casters in use just so you can…
I wanted to attach a webcam via the cool articulating system to an IKEA Bror. Bror comes with regular mounting points. Normally those are for fixing shelves and joining together adjacent Bror columns, but you can also slide on 3D printed…
IKEA BROR Plant Support Clips for Climbing Plants Ideal for guiding climbing plants like pothos (Epipremnum aureum). Printing Settings: Recommended Printing Angle : Print the clips at a slight angle (around 45 degrees) to ensure maximum…
The design is designed to be installed in carriages, it has special cutouts for the frame, but it can be installed in the front or back without any problem. I recommend printing from Nylon or hard TPU with many perimeters. Why? Because I…
Pan Hanger For IKEA BROR Shelves. If things light enough you can hang anything. 0.2mm 20% Creality Ender3 Prusa Slicer 2.3 Category: Kitchen & Dining
Print Settings Printer Brand: Bambulab Printer: P1S Rafts: No Supports: No Resolution: 0.20 Infill: 25% Filament: Oveture Super PLA+ Black Inspired from 2 other different model: 1. -…
Hello! This is the model of an enclosure I designed for the Ikea BROR shelving unit . I designed this to reduce the amount of dust that could settle on the Prusa XL, reduce drafts, and eventually to set up some air filtration system. For…
This strut can be used to stabilize the IKEA BROR (85cm width and 55cm depth) Category: Other
This is an adapter to mount SKADIS pegboard to the BROR cart. Print two pieces, one of them mirrored on the X axis.
LED Strips in all glory, but when the adhesive don't like the surface you need a solution, like this one.
IKEA BROR Cabinet Bracket / Brace for Shelves. Replaces the shelving brace. Reinforced option if you have a heavy shelf. Minimal supports needed.
Spacers for the back and sides of the ikea bror workbench drawers. Ikea link: https://www.ikea.com/us/en/p/bror-work-bench-with-drawers-black-pine-plywood-70494300/ Drawers are: 33 1/2x15 3/4x35" Inspired by the design for the larger…
I needed a way to attach a "da light" light bar to the BROR shelf. You should be able to use anything as long as it is not too heavy. For attachment you will need M3 bolts and hex nuts.
This is a paper towel holder that mounts directly to IKEA's Bror units with M5 bolts. I printed this in PETG.
I've made this design to have more surface area on the floor, to limit marks on soft floors like wood or lino. Parameters Filament: SUNLU PETG Infill: 15% Wall: 3 Those settings worked greate for me. In my case it support max 100 Kg. For…
Print with a brim to lock the piece in place. Otherwise there is chance it move. You can then fix the piece with one small nail at the top. If you print it, and it works for you, please rate it and post a make, that would be highly…
This is a spool shelf designed to be installed on the IKEA Bror Trolley. It uses the extra hole where a Bror shelf could be placed for the top layer, and requires drilling extra holes for the bottom layer. Alternatively you could just…
Make your IKEA BROR even more versatile with this pluggable hook. Mounting It's really easy, the hook just need to be plugged on the sheet metal (see picture). On my BROR it fits thightly. If you need more space you can adjust the Freecad…
This custom Gridfinity base is designed specifically for the IKEA BROR drawer (84x54cm) . It consists of several grid modules, with two integrated padding sections on the left and right sides, as well as at the back. The measurements are…
In addition to the IKEA screws I needed only M4 square nuts (according to DIN562), but M4 hex nuts (type DIN934 or DIN439) should fit too. Resizing of holes in the posts with a 6.5mm drill necessary for better fit. Pressfit of M4 square…
I love the expandable steel sheet holder from Whity but I have my 3D printer in a IKEA BROR workbench. This workbench has its table to op some C-channel and that does not make for simple mounting of the sheet holder. So I made two…
The dimensions of the steel frame of the plywood top are different from other BROR shelves (15mm length, 2mm thickness vs. 10mm length, 1mm thickness), and thus this clips will only fit on the plywood top. Printing I printed this out of…
Simple parametric riser to help level Ikea BROR shelving on uneven surfaces that prints quickly and follows the original Ikea design. Adjust the RiserHeight parameter to the height between the bottom of your BROR leg and the floor. This…
I used 18mm wooden dowels for my setup. The holes can hold a 22mm rod.
In addition to the screws from the IKEA by-pack kit you need a 3.5mm x 14mm panhead for fixing the plywood shelf. The square nuts are a press fit into the 3D-item. Note: If you don't have enough screws left from the by-pack kit, you can…
I remixed the modell of straubi to fit on the bigger Bror with this special machanism to install the shelfs. For istalation you need: 4x screws M5x20 4x M5 nuts 4x bars in the right lenght (you can measure it yourself)
I found it challenging to print the original pegboard plates in any orientation, so I redesigned them in two parts to slot together. I only have the one BROR so didn't need the dual plates and just focused on the corner aspect. The M5x16…
use a M4 screw to attach direkt to the self. Since in my shelf not all holes are strait i have a left and a right version that is a bit tilted.
This custom-designed 3D printable mount allows you to securely attach a 22"x22" IKEA Skådis pegboard to the side of an IKEA Bror utility cart—without the need for any additional hardware. It is fully compatible with the standard fasteners…
Stronger version of @lochej_2068433 adapter. You need to mirror in X axis for the other side.
Mounting system to mount your filament spool inside a IKEA Bror cabinet in the corner and in the center. I wanted to mount two filament spools to my Bror cabinet and saw the design of McVolta . However I wanted to use the Filler Filament…
These simple brackets hook perfectly onto your IKEA Bror shelf, no glue or hardware required! Easily adjust the distance between the brackets to fit any roll. Slide the corner of the slit into the connection between the shelf top and the…
Summary I have cats, and they are curious when the printer starts printing. So I needed a way to keep them out. What started out as taping some plexi glass to my IKEA Bror shelf turned into this. We'll see where it goes from here.…
I created this mounting system to attach a tripod to an IKEA BROR cart to create a tiny film studio. I used a Manfrotto 055 Tripod but the clamp should work with many other tripods as well. Additional Hardware needed: 1x M5x40mm Hex Screw…
Magnetic LedClip for the Bror Ikea table. Magnet : Ø 4mm, 2.7mm height
Slightly longer version of a IKEA Broro shelf hook, so you have more clearance between bottom of shelf above and the hook
Printed in TPU95A with 100% infill 2 models: One closely modeled after the original and one with additional support area to reduce footprint on floor Comes with parametrized Fusion 360 file in-case you want to edit it. My designs are…
Requires original or linked pins for mounting: https://www.printables.com/model/967261-ikea-bror-pins
Mount for a Logitech C920 or C930 webcam to attach to an IKEA Bror cabinet. Useful for filming prints or work.
This model allows mounting a Brennenstuhl Alu-Office-Line Power Strip 6-fold (1391040600) on the side of an IKEA Bror shelving unit with 40cm depth (e.g. 094.717.41 ). Required for assembly are two M5x9.5 heat set inserts (M5x5.8 probably…
Here are some mounts that I made to lock wooden boards on the Ikea Komplement for Pax, used on a Bror. I used PETG to make it stronger but any plastic could probably do it. It can be printed without supports. I made it for 10 mm wooden…
Basic filament spool brackets for the IKEA Bror utility cart. If you use 36" dowels, they will stick out of the sides of the cart a little bit as shown in the photos. I chose not the cut them down after installing since I'm lazy. The ID…
A corner reinforcement for the IKEA Bror cabinet making it more stable and square. It fits in between the bars on which the shelf rests and can be attached with a M4 screw and nut to the original holes in the Bror cabinet. I have made two…
Tired of your robot vacuum getting stuck? This is a remix of the excellent original BROR Riser design by https://www.printables.com/model/415849-ikea-bror-adjustable-foot . The main difference? Now you can choose your perfect height! The…
Mounts the touchscreen of the Elegoo Neptune 4 Pro (other models may work too, idk) to IKEA Bror serving trolley. I guess it should work for other Bror furniture as well. The plate visible in the f3d is positioned in the 3mf file around…
I used the measurements from the original model to create this clip from scratch. The clip still snaps securely onto the BROR workbench frame, but the hook geometry was removed and replaced with a flat mounting interface . This allows…
Attachment for the IKEA BROR Workbench Modular Clip Base https://www.printables.com/model/1529291-ikea-bror-workbench-modular-clip-base Designed specifically to hold a filament clipper. Snaps onto the base clip and keeps the tool securely…
Attachement to the IKEA BROR Workbench Modular Clip - Clipper Holder
IKEA item number 303.332.86 BROR workbench frame hole cover
Contains all the spacers for one 74cm Ikea BROR Workbench Drawer in a single file with the now properly mirrored corner. Link to the workbench these spacers are for:…
I needed a place to put my Creality Space Pi Plus close to my printer in the IKEA Bror cabinet. Tore Kjær Busk already made a nice shelf, but I needed it to be bigger to fit de Pi Plus. And since I have mounted drawers beneath the shelf I…
I needed a solution to hold my filament on the inside of an IKEA bror storage solution so I created this simple model. You can mount it using the screw/nuts that come with the IKEA system. Print it in PLA/PETG using sufficient walls and…
Paper towel holder for IKEA Bror. I'm using it on 190cm high Bror variant. Printed from PETG, no supports. Mirror second part in slicer or use provided 3mf file. Additionally needed: 53cm (or close) long, 20mm diameter wood or metal rod…
Easy addon for the IKEA BROR shelves. 2 hooks that can handle quite some weight. Ideal for coats, empty backpacks, hats. I also made a version for the middle connection between multiple bror units that can be found on my profile
Easy addon for the IKEA BROR shelves. 2 hooks that can handle quite some weight. Ideal for coats, empty backpacks, hats. I also made a version for the corner of a single BROR unit that can be found on my profile
Printed in 3 parts, no need for glue, just insert right and left in the center part. Use the holes on the left and right with screws and bolts to attach the sides to the BROR Shelves.
Reinforcement for the IKEA Bror shelf, which can be quite wobbly. This element was designed to reinforce the corner joint, additionally cross-connect the sections, and raise the shelf for easier opening of the AMS. You need 3 pieces of…
About Allows mounting LED strips/bars horizontally under the IKEA BROR metal shelves. Can use a common gridfinity 6x2mm magnets for mounting or double side tape. Different models with hole, without hole and without magnets. Please like,…
Summary Simple adapter that allows you to securely mount Brennenstuhl Premium-Line 6 socket strip to 85x55x190cm deep IKEA BROR shelving unit . I cannot guarantee compatibility with different socket strip or IKEA BROR furniture. I think…
Remix of Skadis Desk Clamp (Universal Clamp with Snap Fit) , modified to fit the thicker top of the IKEA BROR trolley. Changes from the original: Clamp throat deepened by 5mm : the distance between the back wall and the screw hole went…
I printed this with PETG at a .2mm layer height with 100% infill since it's so tiny. I haven't had any issues with it it. You can probably get away with less infill.
This simple hook uses gravity and balance to hang items like headphones, cables, light strings, whatever you want from IKEA BROR metal shelving unit brackets. Print in PETG or PLA or ABS, no resizing required. Higher infill for heavier…
This is pretty simple, I needed a trolley to be able to get some tools out and move them around but I also had this spare IKEA pegboard. A couple of iterations of 3D printed mounts I have combined the two like an IKEA Voltron if IKEA was…
IKEA BROR Shelf Support Cable Clips These small clips allow you to attach cable/zip ties to the side and center support brackets on an IKEA BROR shelving unit.They are very useful for securing wires that you want to run along under the…
After adding a paver stone to my Bror shelf, I didn't have much room for my tools to sit so I created these. The holes were made for #10 metric screw. The caliper holder is a remix of: https://www.thingiverse.com/thing:4049323 The scraper…
I didn't need a fully enclosed cabinet but I wanted to use 3mm plexiglass. I remixed the fusion file from oa1 and gave the holder a 4mm width. This keeps the plexi secure but also allows you to slide it out easily if you need to clean or…
This shelf was added to IKEA BROR WORKBENCH to use it as a desk. Wood: 18 mm thick pine wood panel. Size of the panel: 109 x 30 to 35 cm. Wood stud: 2 pieces of 3,4 x 1,8 x 30,8 cm pine wood with R 6 mm edges (to be made with a router).…
Attach an Ikea SKADIS pegboard to the side of an Ikea BROR shelf. Compatibility The 3-hole variants should work for any SKADIS/BROR size combinations as long as the SKADIS board is wide enough. I've tested the 3-hole model using a square…
ledstrip clips to mount Ikea MITTLED in Ikea BROR metal storage cabinet post. Print using PETG filament. After printing, first click into mittled, then place assembly in a inner corner of BROR steel post. First clip in bottom. Top clip…
I made this simple rack to sort the mess with the many different capsules. Its designed to mount it on the side of a IKEA Bror shelf as seen in the Pictures. You can also mount it on a wall or different places by using the mounting holes.…
Hanger/hook for Bror storage by Ikea The number in the name is the width You need a m5 bolt and nuts You might also want to add some padding to protect the paint from scratch with some padded tape for exemple
This simple model allows to mount Filler on both sides of IKEA BROR shelving unit in both directions - parallel or facing back of the unit. There's no left/right version so it's easy to switch to other mount point. You will need at least…
UPDATE Shelf support holder I added optional holder brackets for the two additional support beams (see instruction pdf page 1). Those can be used when the supports are not held securily by simply quenching them into the frame. If used,…
The IKEA Bror is a great utility cart to use with 1 or 2 MK3S's. With the storage opportunities under the cart and the two shelfs, I designed a simple solution to store 5 sheets and have some drawers for storage (allen wrenches, screw…
I designed this adapter for my Bror shelves. Note that I have 2 sets of shelves adjoined together. Printed with Overture Space Gray PLA. No supports required. Visit Kai's page for instructions to assemble.
Air filter upgrade for BROR Enclosure V1. Material and instructions for the Enclosure can be found here: https://www.prusaprinters.org/prints/34759-bror-enclosure-v1 This air filter should be printed and assembled onto the enclosure back…
I created this toolholder so I can keep few of the most commonly used tools out of the main bench (and keep the sharp knifes out of kids reach). It attaches to existing places on IKEA Bror. If you print it upside down it it doesn't…
Few web search closed on the IKEA BROR system. As always, IKEA supply cheap and very efficient furniture. As before with the LACK table, IKEA can supply a good solution for bigger printer enclosure. The BROR shelves system is composed of…
"BROR Filament Spool Holder" is an additional part that allows you to fix the "UNIVERSAL FILAMENT SPOOL HOLDER" on the BROR bookcase by IKEA. (Without that text shown at the top) All you need is: 2X Original black M5 bolts with nuts…
This is a adjustable foot for the Ike Bror shelf. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 20% Filament: Polymax Pla Black Notes: M8 nut Wascher m8 / 24mm / 2 mm Add a…
Spool holder for an Ikea Bror cabinet. Simply use two broomsticks to make the spool holder. Then print the slightly modified Mini Base spoolholders to set on top of the broomsticks. The Bracket part needs to be printed twice. Also the…
This object lets you install casters to a Bror workbench. It is designed for 1-7/8" (48.5 mm) x 2-9/16" (65.5 mm) casters. The holes for the bolts are 2-1/8" (54 mm) x 1" (25 mm) apart. The bolts I used are 1/4" (6.25 mm) in diameter,…
I wanted to add some on-desk power to my BROR workbench which I use for processing 3D prints, and other work-benchy tasks. I've got a lot of CMD power products throughout my home and decided to the the CMD Capsule as it looks good,…
![[IKEA BROR/SKADIS] Back Mount for BROR shelf of SKADIS w. original IKEA screws](https://media.printables.com/media/prints/1219899/images/9151329_160d6f57-99d3-4a80-b199-44bc098530f9_2f7df28a-ce72-4ae0-9512-bfbf6f180a00/bror_skadis-mount-03.jpg)
![[IKEA BROR] workbench/trolley Cable Clips](https://media.printables.com/media/prints/0b4bada9-efe8-4252-af6e-d90732fc6973/images/9245576_26b665d1-61f9-49a8-a10e-96af5eb07de4_a822794a-8065-4533-82e1-b50e8e777193/3d-model-11.png)
![[IKEA BROR] Vertical Shelf Lock 2.0 (w. original IKEA screws)](https://media.printables.com/media/prints/8f7da792-2494-4a58-ace5-45675e4df2b9/images/9694904_ca2205bb-e8b9-49f2-a27f-b37480e8d908_399d13f0-75d7-4390-a65e-8fb367052252/makes-02.jpg)
