SKADIS Pegboard for a BROR Shelf
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add a basic pegboard to your BROR shelf! Same hole size as SKADIS boards
- Rating
- 0 / 5
- Likes
- 35
- Downloads
- 97
- Makes
- 0
- Views
- 935
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Pretty simple - We wanted to have my tools close by and organised so we copied the IKEA SKADIS pegboard and redesigned it to mount to a BROR shelf.
There are two kinds:
CORNER sections - These are for a single BROR shelf. Add them to each side. The top part is curved to match the shelf.
DUAL sections - These are if you have two BROR shelves together. Top part is also curved.
You need 2 M5x25 bolts and 2 M5 nuts for each section. The BROR has holes in it already for mounting things.
We used 3DJake PLA to print these: https://www.3djake.com/3djake/3djake-filaments
5 walls, 5 top and bottom layers and 20% infill. CORNER sections require supports. DUAL sections don't.