SKADIS Pegboard for a BROR Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add a basic pegboard to your BROR shelf! Same hole size as SKADIS boards
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 935
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Pretty simple - We wanted to have my tools close by and organised so we copied the IKEA SKADIS pegboard and redesigned it to mount to a BROR shelf.
There are two kinds:
CORNER sections - These are for a single BROR shelf. Add them to each side. The top part is curved to match the shelf.
DUAL sections - These are if you have two BROR shelves together. Top part is also curved.
You need 2 M5x25 bolts and 2 M5 nuts for each section. The BROR has holes in it already for mounting things.
We used 3DJake PLA to print these: https://www.3djake.com/3djake/3djake-filaments
5 walls, 5 top and bottom layers and 20% infill. CORNER sections require supports. DUAL sections don't.