1 / 2
IKEA Bror utility cart filament spool shelf for 3/4" dowels — image 1
1 / 2

IKEA Bror utility cart filament spool shelf for 3/4" dowels

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This remixed shelf increases the ID of the bore to accept 3/4" dowels. Easier to procure in the US.

Rating
0 / 5
Likes
1
Downloads
13
Makes
0
Views
170
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Basic filament spool brackets for the IKEA Bror utility cart.

If you use 36" dowels, they will stick out of the sides of the cart a little bit as shown in the photos. I chose not the cut them down after installing since I'm lazy.

The ID is still tight for ¾" diameter dowels so you'll likely need to sand down the tips of your rods down a bit to get a good fit. The oak dowels I purchased from Lowes needed some light sanding and provide a snug fit. 

As suggested by the original file author, I used m6 x 20mm hex socket flanged bolts and nuts for mounting.

Tags