1 / 2
IKEA Bror utility cart filament spool shelf for 3/4" dowels — zdjęcie 1
1 / 2

IKEA Bror utility cart filament spool shelf for 3/4" dowels

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This remixed shelf increases the ID of the bore to accept 3/4" dowels. Easier to procure in the US.

Ocena
0 / 5
Polubienia
1
Pobrania
13
Wydruki
0
Wyświetlenia
170
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Basic filament spool brackets for the IKEA Bror utility cart.

If you use 36" dowels, they will stick out of the sides of the cart a little bit as shown in the photos. I chose not the cut them down after installing since I'm lazy.

The ID is still tight for ¾" diameter dowels so you'll likely need to sand down the tips of your rods down a bit to get a good fit. The oak dowels I purchased from Lowes needed some light sanding and provide a snug fit. 

As suggested by the original file author, I used m6 x 20mm hex socket flanged bolts and nuts for mounting.

Tagi