IKEA Bror Horizontal LED Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
About
Allows mounting LED strips/bars horizontally under the IKEA BROR metal shelves. Can use a common gridfinity 6x2mm magnets for mounting or double side tape.
Different models with hole, without hole and without magnets.
Please like, create makes and add comments also to the original model, thanks!
Dimensions:
height 40mm
width 30mm
width of the area for the led strip ~25mm
45 degrees so the led will flood the shelf efficiently
holes for 6x2mm magnets
screw hole in the middle 2mm
Changelog:
2026.06.014 - initial release
Print:
provided gcode is just for time and material estimates
print with the triangle upwards, no brim, no supports needed.
0.2mm layer 0.4 nozzle, 2 perimeters should be enough.
PETG recommended
you probably want 2 instances per LED bar
Assembly:
optionally drill a hole
optionally mount 6x2mm magnets
optionally install double sided tape where magnets would be.. or whatever
if needed mount LED bar brackets with a screw