IKEA BROR Workbench Modular Clip - Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular mounting clip to the IKEA BROR Workbench
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I used the measurements from the original model to create this clip from scratch. The clip still snaps securely onto the BROR workbench frame, but the hook geometry was removed and replaced with a flat mounting interface. This allows different attachments to be mounted on the same clip, making the system modular and extensible.
The holder clips directly onto the BROR workbench without screws or permanent modifications. It is part of a modular system, making it easy to design and swap additional tool-specific attachments in the future.
Note that like in the original is noted:
The dimensions of the stell frame of the plywood top are different from other BROR shelves, and thus the clip will only fit on the plywood top.