Highway Pegs - Vstrom 800DE + heed crash bar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Still in development!!! Highway pegs for changing leg position during a boring highway drive
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 35
- Makes
- 0
- Views
- 537
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Still in development!!! I don't know if it's strong enough in the long run and if it will work in summer temperatures. Printed by PETG with 5 perimeters and 15% infill.
The side near the engine must be protected with a heat-resistant layer. I used: https://www.hornbach.cz/p/termoizolacni-folie-za-radiatory-role-5-m-x-50-cm/10607114/ and https://www.3market.cz/9086-oboustranne-lepici-paska-3m--tloustka-0-19mm/ Tested on a 50 km route at an ambient temperature of 17°C with no rain, and so far, it works :-)
The highway pegs snap onto the lower crash bars of the Heed brand. They allow you to rest your feet during long rides if you don’t need to shift or use the rear brake.
I’d be happy to hear any suggestions for improvements.