1 / 1
Creality K2 Plus poop guide and bin (magnetized)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Creality K2 Plus Filament 'poop' guide and bin held in place using 8mm dia. x 2mm thick neodymium magnets.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 256
- Makes
- 1
- Views
- 1,371
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Creality K2 Plus Filament 'poop' guide and bin held in place using 8mm dia. x 2mm thick neodymium magnets.
Features
- Guide ensures filament poop directed into the bin.
- Guide has alignment tabs for easy fitting into the printer's chute exit.
- Guide and bin are separate to allow for overflow without impeding printer's chute exit.
- Doesn't impede fan area.
Non-printed materials required
- 5 x 8mm dia. x 2mm thick neodymium magnets.
- Cyanoacrylate, Epoxy (or similar) glue.
Print settings
| Property | Value | Notes |
| Filament type | PETG/ABS/PLA | |
| Filament color | Black | Black to match back panel color. |
| Layer height | 0.2 to 0.3mm | |
| Infill | 100% | |
| Perimeters | N/A | |
| Support material | No | |
| Model orientation |
| |
| Clean up | N/A |
Assembly
Glue the magnets into the provided holes.