1 / 12
Prusa Core One/+/Gen2 Telescopic Spool Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This telescopic Spool Holder replace the original side spool holder of the Prusa Core One/+/Gen2.
- Rating
- 5 / 5
- Likes
- 57
- Downloads
- 182
- Makes
- 7
- Views
- 2,445
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This spool holder is inspired by the one made by MaikyX.
It replaces the original side spool holder of the Prusa Core One.
- Its advantages:
With its screw, it can support filament spools with a width of 130mm, including 2kg spools.
It has a grip to easily screw or unscrew it. - Its 42mm diameter allows you to use narrow spools with a 75mm central hole (Giantarm, Geeetech, ...) without it touching the bottom wall of the printer.
- For wide spools with a 75mm hole use the 2 parts PrusaCoreOne_TSH_ScrewSpacer.stl and PrusaCoreOne_TSH_NutSpacer.stl.
Optionally, you can glue 4mmx2mm round magnets on these 2 parts (8 holes are available on each of the 2 parts) to hold them on the printer case.
Its assembly uses the 4 original M3x10mm screws.
RELEASE
02/04/2025
The files with magnets are now published in STEP format (PrusaCoreOne_TelelescopicSpoolHolder.step) to allow customizing.