1 / 5
ATX I/O shield and HDMI flex mount for Enterlogic "Denise" Amiga clone motherboard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom I/O shield for the mini-ITX "Denise" Amiga clone motherboard.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 47
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
ATX I/O shield and HDMI flex mount for Enterlogic "Denise" Amiga clone motherboard
Details of this very cool motherboard: https://www.enterlogic.se/?page_id=180
I/O shield
- Your printer should be well dialed-in for this model. Recommend PLA for better precision.
- The PS/2 area is tricky and tolerances may be very tight depending on the case.
- Print with supports under this area and gently remove with a craft knife; this creates some space under the PS/2 area to prevent excessive fouling.
- The .FCStd is provided if you need to tweak things for your case.
HDMI flex mount
- For mounting “Connector A4” from this product series: https://www.aliexpress.com/item/1005006437300837.html
- Space for a small tactile switch for controlling single-button RGBtoHDMI such as https://github.com/jbilander/A500_RGBtoHDMI
- I recommend M2.5 hardware with appropriate washers to mount it to the motherboard's holes as it gives you some adjustment. You will need two M2.5x15mm standoffs to mount it and some thin plastic washers to protect the motherboard (see last photo).