Short 3-Inch Pillar Candleholder for Electric Candles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An elegant, shorter candleholder for a 3-inch electric pillar candle. Adds charm to any setting.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 46
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
3-Inch Pillar Candleholder
A minimalist candleholder designed to hold a 3-inch (76mm) electric pillar candle. Featuring simple curves, this sleek, single-piece design is easy to print and blends seamlessly into any decor style.
Complete the look with the full set of three candleholders: tall, medium, and small (this model).
Print Settings
- Dimensions: 63.5mm (H) × 85.6mm (W) × 85.6mm (D)
- Material: PLA (compatible with other filaments)
- Supports: Required (Everywhere) — A cross pattern works best for supporting rounded overhangs
- Infill: 15–20%
- Layer Height: 0.2mm
Note: To reduce support usage, consider splitting the model in half and printing both sides separately, then gluing them together after printing.
Post-Processing
Sanding and painting can enhance the finish, but are entirely optional and based on user preference.
Optional Weighting Tip:
To add stability and a more substantial feel to the candleholder, consider using gyroid infill during printing. After the print is complete, drill a small hole into the bottom and fill the interior with a weight-enhancing material. Table salt is an excellent option—it's fine-grained, inexpensive, and readily available at most dollar stores. Once filled to your desired weight, seal the hole by hot-gluing a round piece of felt or non-slip pad over the base for a clean and functional finish.