Keg Washer Nozzle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Narrow Keg Washer Nozzle, blank so holes can be added using a drill as necessary
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a narrow spray nozzle I created to use with a home built keg and fermenter washer.
I have a stainless steel ball head but it does not fit inside my 8 litre Kegland Oxebar kegs or 10 litre stainless steel kegs.
This is a female ½ BSP connection with a cylindrical section above it. I designed it this way as I was not sure how many sprays I wanted, and particularly because I wanted to manage the amount of water coming in, as draining back into the bucket is a issue with the narrow neck.
I drilled holes in the top until I got good coverage across the sprays.
I used my thread die holder (see my models) to cut ½ BSP threads on Screwfix 20mm uPVC conduit, and screw the spray head straight onto the end of the pipe.