Keg Washer Nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Narrow Keg Washer Nozzle, blank so holes can be added using a drill as necessary
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a narrow spray nozzle I created to use with a home built keg and fermenter washer.
I have a stainless steel ball head but it does not fit inside my 8 litre Kegland Oxebar kegs or 10 litre stainless steel kegs.
This is a female ½ BSP connection with a cylindrical section above it. I designed it this way as I was not sure how many sprays I wanted, and particularly because I wanted to manage the amount of water coming in, as draining back into the bucket is a issue with the narrow neck.
I drilled holes in the top until I got good coverage across the sprays.
I used my thread die holder (see my models) to cut ½ BSP threads on Screwfix 20mm uPVC conduit, and screw the spray head straight onto the end of the pipe.