1 / 3
Neptune 4/4pro X-Axis Double Shear & Motor Upgrade
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows use of 3rd party Motors, adds double Shear on x Axis, integrates Limitswitch with Doubleshear or longer motor
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 107
- Makes
- 3
- Views
- 1,144
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For whom is this for?
N4 or 4Pro owner that either wish to use 3rd Party Motors - those have longer shafts which does collide with limit switch. Or those who want to add Doubleshear with either stock motor or 3rd Party Motor.
What to buy(BOM)
- 4x M3x40mm shcs or bhcs
- 4x M3x6mm fhcs or bhcs
- 2x M3x3(L)x4.2mm(OD) Heat Insert
- 1x F625 Bearing with flange ABEC7 or ABEC9
If you dont want to go the double shear route you would only need 2x M3x6mm and no bearing.
Print recommendation
- PETg-cf/gf or ASA/ABS-cf/gf, PETg acceptable
- Layerheight/width: 0.2/0.4
- Walls: 6
- Toplayer: 6
- Bottom Layer: 4
- Infill: 10%
- no supports
- no brim required
- ! for cf filament coat PCB interface surfaces with lacquer, superglue. CF is electrically conductive