1 / 5
Duraco JW-82 Watering Can Nozzle ( 3 versions) — image 1
1 / 5

Duraco JW-82 Watering Can Nozzle ( 3 versions)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

1) A simple nozzle for 1" thread Duraco JW-82 watering can. 2) same model, with 2.5 mm holes. 3) "Deluxe" version. ;)

Rating
0 / 5
Likes
9
Downloads
58
Makes
0
Views
282
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

A simple watering can nozzle, the original that was too brittle due to years of service.  

EDIT: Different sizes will be created upon request, to fit your specific watering can.

Printed in PLA,  it can be printed in PTEG for increased heat resistance.

It prints with minimal supports, mostly for the threads.

Printed in standard quality with 10% infill, but 15% will be more robust.

The thread type used is "ACME Screw Threads" and the size is "1". It's a perfect fit for JW-82  watering can.

The diameter of each hole is 5 mm.

Edit: Added same model with 2.5 mm holes.

Edit: Added “Deluxe” Version, 2.5 mm holes in different angles.

IMPORTANT: When printing “Deluxe” version, please select “Tree” Support type. It will be a lot easier to remove supports from the inside of the nozzle.

Measurements of the print are:  57.4 x 57.4 x 40 mm

 

Tags