Duraco JW-82 Watering Can Nozzle ( 3 versions)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1) A simple nozzle for 1" thread Duraco JW-82 watering can. 2) same model, with 2.5 mm holes. 3) "Deluxe" version. ;)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple watering can nozzle, the original that was too brittle due to years of service.
EDIT: Different sizes will be created upon request, to fit your specific watering can.
Printed in PLA, it can be printed in PTEG for increased heat resistance.
It prints with minimal supports, mostly for the threads.
Printed in standard quality with 10% infill, but 15% will be more robust.
The thread type used is "ACME Screw Threads" and the size is "1". It's a perfect fit for JW-82 watering can.
The diameter of each hole is 5 mm.
Edit: Added same model with 2.5 mm holes.
Edit: Added “Deluxe” Version, 2.5 mm holes in different angles.
IMPORTANT: When printing “Deluxe” version, please select “Tree” Support type. It will be a lot easier to remove supports from the inside of the nozzle.
Measurements of the print are: 57.4 x 57.4 x 40 mm