1 / 2
StoiCam Voron 2.4 300mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A frame mounted camera housing for Waveshare OV5648 and similar cameras that have a rear mounted heatsink.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 59
- Makes
- 0
- Views
- 675
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The HappyCam wasn't compatible with my camera as it has a rear mounted heatsink. I took measurements and modeled this from ground up using HappyCam as a reference. I added a cavity and vent to give the heat room to dissipate as this camera gets hot in ambient heat let alone inside an enclosure. Mount to frame with M3x20 and t-nuts and use Voxel3D's lid on the referenced remixed model with an M3x8 screwed directly into plastic. Example video still is mounted on a 300mm Voron 2.4.
Camera I'm using: