StoiCam Voron 2.4 300mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A frame mounted camera housing for Waveshare OV5648 and similar cameras that have a rear mounted heatsink.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 675
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The HappyCam wasn't compatible with my camera as it has a rear mounted heatsink. I took measurements and modeled this from ground up using HappyCam as a reference. I added a cavity and vent to give the heat room to dissipate as this camera gets hot in ambient heat let alone inside an enclosure. Mount to frame with M3x20 and t-nuts and use Voxel3D's lid on the referenced remixed model with an M3x8 screwed directly into plastic. Example video still is mounted on a 300mm Voron 2.4.
Camera I'm using: