1 / 1
Rubber Foot Raiser for 3030 Aluminium extrusion eg RatRig cases — image 1

Rubber Foot Raiser for 3030 Aluminium extrusion eg RatRig cases

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

alternative Foot for 3030 extrusions like for the RatRig printers with higher ground clearance

Rating
0 / 5
Likes
2
Downloads
12
Makes
0
Views
97
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

If you are looking for a base for your 3D printer that gives you a little more ground clearance to be able to clean under the printer or to store something, then this mod is just right for you.

There are different versions:
50mm, 60mm, 70mm, 80mm and 90mm

The M8 screw in the centre is only for general rigidity and should not be tightened.

You can print the base out of TPU or any other material. TPU is used for vibration suppression so that the vibrations of the printer are not transferred to the surface. The surface should also be even. TPU can compensate for minor unevenness.

Tags