Kakusta Portable Pen Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a pencil and pen case/stand. It is based on the Kakusta Portable Pen Stand.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 104
- Makes
- 1
- Views
- 547
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Standard Digital File License
This is a pencil and pen case/stand. It is based on the Kakusta Portable Pen Stand (https://a.co/d/az1rtzK). I designed this because I couldn't justify paying $20 just for a simple pencil case. You need a piece of 1.75mm filament and four 8x3 mm magnets (https://a.co/d/9xFBtch or in the BOM). To assemble it, you only need to put a piece of 1.75mm filament into the hole in hinge, cutting it to size, and then super gluing only ONE of the sides to the hinge. You then need to put the magnets into the designated holes with a little bit of super glue, and be sure you triple check the polarities of the magnets before you super glue them in. With that you should have a fully functioning 3D printed version of the Kakusta Portable Pen Stand! Message me if you have any questions.