Mounting Bracket for Bitspower P5D PWM Pump V1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bitspower PC Water Cooling Pumps mount to PC case radiator rails.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Bitspower P5D PWM Pump V1 mounting brackets, screws into top of pump and attaches to the rails on a PC case where water radiators attach. Two sets: one for centered pump, and one for offset to the left or right.
Use of a M3 screw and nut recommended for attaching to rails, and M2 or M3 for top of the water block attachment (Check yours, they seem to vary somehow. I've got one pump of each). If using larger screws or tolerances are tight on your printer, use of a drill to enlarge the holes slightly will work. I printed at 0.30 DRAFT layer height on their side and needed to slightly clean up the holes.
Print two brackets for each pump, either two centered or two offset. Recommend placing on it's side (like in the photos) and 25%+ infill of a stronger and higher temp resistant plastic like PETG or ABS.