Logitech StreamCam Snap-on Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snap-on protection cover for the Logitech StreamCam.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 98
- Makes
- 1
- Views
- 702
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Public Domain
I was looking for a protection cover that is suited for transporting the Logitech StreamCam. The covers I found were a bit loose and wouldn't stay on the webcam so i designed one with a snug fit and two hooks to prevent it from slipping off during transport.
It is designed with tight tolerances to ensure a good fit and a close sealing on the open edge.
Please note the post-processing notes.
Printed in 0.2mm Quality setting and Fillamentum PLA Extrafill Mint.
Post-processing
The two snapping hooks need to be cut at an angle (roughly 45°) by hand to create a smooth plane*. You need to use a sharp knife so please be careful. I posted a picture showing the spot you need to cut.
*This is necessary due to the layering that occurs with FDM-printing: the angle I originally designed created steps that prevented the hooks from sliding smoothly over the webcams edge.