Scalpel Holder - Print in place case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print in place case for a hobby knife scalpel
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A case for a hobby knife/scalpel with a print in place hinge joint. Takes 8mm diameter hobby knifes (seems to be standard). Has a space around the blade end for spare blades.
I printed in PETG but you can print in in PLA fine. Suggested slicer settings are 3 wall thickness, .2mm layer height on a .4mm nozzle. %15-%30 infill. Print in the orientation shown in the screen shot and the hinge should break open well after printing.
I recommend printing with 5-10mm brim
I can't guarantee the print in place joint will work if you change nozzle diameter. I've included .Step and f3d files so you can make easier adjustments if need be.
13.02.25 Revised the angles for the lid snap so they print more easily.