Severance Lumon Keycard Badge Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Badge holder in the style of the lumon keycards from the tv show Severance
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 243
- Makes
- 0
- Views
- 2,198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
I saw the original model for the Lumon Keycard and really wanted to make a holder for my actual work badge. So, I made a bunch of modifications to allow an RFID badge to be able to slide in, as well as be locked into place by a lanyard clip.
Bonus points for printing in a semi-transparent filament so that the white RFID keycard makes the detail pop like the actual Lumon MDR keycards on the show.
I printed mine at 0.2 Quality from PrusaSlicer with a brim and a couple organic supports. Because of the pocket and how thin the entire model is I thought I'd print it on its side to eliminate most of the bridging, try to increase bed contact area, but also the layer lines going along the length of the badge might make it stronger. I didn't have any issues printing and I printed a few of these.
The model viewer on printables makes it look like there's a card sticking out of it, and a pin going through the lanyard hole, but those are negative volumes from PrusaSlicer. The gcode is what I used to print it.
Now when you badge into work all you have to do is imitate the elevator ding.