Eye Drop Assist for Vials V3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Helper for easy positioning of single dose eye drop vials and support for triggering a single drop without wasting fluid
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 65
- Makes
- 0
- Views
- 264
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
There is a version with horizontal cutout (blue) and one with vertical cutout (red) for the vial. The clamp can be optionally mounted on both versions. From an ergonomic point of view the horizontal version is better suited for individual use while the vertical version is better suited for use in combination with the clamp.
The stroke of the clamp is designed so that only one or two drops are released.
The tool was tested with the following vials:
Tim-Ophtal
Timo-Stulln
Ofloxacin
Ganfort
All parts should be printed with medical antibacterial filament and disinfected regularly.
Printing data:
Nozzle diameter = 0.4 mm
Layer height = 0.2 mm
Perimeter = 3 for the eyepiece
Perimeter = 4 for the clamp
No Support
PLActive Filament Copper 3D
Assembly
Spread the clamp and slide it onto the vial holder as shown in the picture
Turn the clamp clockwise until it clicks into place
