Curved RGB Pixel Pole EMT Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
160° 6-Strand Curved Pixel Pole designed for 12mm RGB Pixels using pixel strips.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 27
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution
160° 6-Strand Curved Pixel Pole designed for 12mm RGB Pixels using pixel strips. 2 of these holders are required, 1 top and 1 bottom, mounted to 1/2" EMT. Height can be adjusted based on sliding the bottom or top mounts as needed. Mounts are secured to the EMT by two 4-40 plastic / course thread screws, 1/2" long or greater. Pixel Strips are secured to the mounts with zip-ties. Leave an empty pixel hole at top and bottom for the zip-tie mount. i.e., if your strands are 50 pixels each, cut the pixel strips for 52 pixels.
EMT should be sized to allow the bottom to be driven into the ground for stability.
Pics show my first build with 300 pixels, 50 on each column to allow connections/power injection to be made at the bottom using 100-pixel strings.