1 / 1
Dose für Stromzufuhr für Kabel aus der Wand / Power box for wall cable — image 1

Dose für Stromzufuhr für Kabel aus der Wand / Power box for wall cable

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is the power box for a cable which comes out of the wall. Dose für Kabel aus der Wand

Rating
0 / 5
Likes
1
Downloads
36
Makes
1
Views
225
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

In my kitchen I have a cabinet. In the rear of the cabinet there is a 220V power outlet which comes directly out of the wall. The previous owner of my apartment installed a lamp to this power outlet.
Having an unprotected power outlet in the kitchen is not a recommended szenario - therefore I've builded this box.

The box is intended to get mounted with 2 screws having 4mm diameter. The holes are in the back. There is also a bigger hole for the power cable in the back.
The last hole is for an power outlet cable of 8mm (you can drill it to 8,5mm after printing). I have connected cabinet-kitchen lights to the cable.

The top is 0.2 mm bigger than the bottom of the box. You probably need to sand the bottom part - it is a very tight fit!

I've printed this box in white PETG, 
Nozzle: 0,4 mm
Infill: 20%

FAQ:

Has the box an electrical certificate? 
=> No, print and use it on your own responsibility.

If you like the model, please consider to give me a “like”.

Have fun with the power box.

Tags