1 / 4
Prusa enclosure-bottom supportings
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MK4S installed in the Original Prusa enclosure vibrates strongly especially at higher extruder Z-position.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 13
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
- This vibrationes have a negative effect on print quality and accuracy.
- The problem reduce two simple printed supports on the bottom of the enclosure, mounted from outside below the printer feet. The supports are 2mm higher than the enclosure feet and that's why the enclosure-bottom will slightly bowed inwards, so that the printer surely stands on the table and not only on the enclosure-bottom.
- Each support is fixed with two M3x30 screws from inside through the original anti-slip shock absorber and through the bottom into hex nuts M3 in supports (the four original M3 holes for shock absorbers in the bottom must first be redrilled to dia. 3.5mm).