1 / 8
Articulated Print in Place Spiky Isopod! — image 1
1 / 8

Articulated Print in Place Spiky Isopod!

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Meet the Spiky Isopod! This print-in-place, articulated model is designed for effortless, smooth printing.

Rating
0 / 5
Likes
15
Downloads
102
Makes
0
Views
354
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Meet the Spiky Isopod! This print-in-place, articulated model is designed for effortless, smooth printing. While it may look spiky, the surface is smooth to touch, making it perfect for fidgeting and handling.

 

3D printing settings
This design is fully print in place and works with Creality slicer’s default settings. For more detailed configurations, see below!

Layer Height: 0.1-0.2mm
Infill Density: 15%
Infill Pattern: Default slicer or experiment with other patterns!
Print Speed: 50–60 mm/s
Support Type: Non-Required!
Support Density: Non-Required!
Bed Temperature: 60°
Material: I have only used PLA so far!

Tags