1 / 8
Articulated Print in Place Spiky Isopod! — zdjęcie 1
1 / 8

Articulated Print in Place Spiky Isopod!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Meet the Spiky Isopod! This print-in-place, articulated model is designed for effortless, smooth printing.

Ocena
0 / 5
Polubienia
15
Pobrania
102
Wydruki
0
Wyświetlenia
354
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Meet the Spiky Isopod! This print-in-place, articulated model is designed for effortless, smooth printing. While it may look spiky, the surface is smooth to touch, making it perfect for fidgeting and handling.

 

3D printing settings
This design is fully print in place and works with Creality slicer’s default settings. For more detailed configurations, see below!

Layer Height: 0.1-0.2mm
Infill Density: 15%
Infill Pattern: Default slicer or experiment with other patterns!
Print Speed: 50–60 mm/s
Support Type: Non-Required!
Support Density: Non-Required!
Bed Temperature: 60°
Material: I have only used PLA so far!

Tagi