Ball Pump Nozzle (Regular and Schrader)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use these nozzles with a standard ball pump and a schrader pump for filling vessels with a wider hole (6.5mm - 11mm).
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 173
- Makes
- 4
- Views
- 389
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use these nozzles with a standard ball pump and a Schrader pump for filling vessels with a wider hole (6.5mm - 11mm).
I printed this with a layer height adjustment. 0.0mm-8.0mm was printed with 0.1mm. The rest was 0.2mm SPEED on the MK3S+.
I printed it with the tip of the nozzle on the bed plate with a brim and no supports.
The OG creator recommended PETG, but since this is larger and has more strength I used PLA and it worked great.
I used this to pump up both and air mattress and an exercise ball and it worked great with little air loss.