Ball Pump Nozzle (Regular and Schrader)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use these nozzles with a standard ball pump and a schrader pump for filling vessels with a wider hole (6.5mm - 11mm).
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 170
- Wydruki
- 4
- Wyświetlenia
- 386
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use these nozzles with a standard ball pump and a Schrader pump for filling vessels with a wider hole (6.5mm - 11mm).
I printed this with a layer height adjustment. 0.0mm-8.0mm was printed with 0.1mm. The rest was 0.2mm SPEED on the MK3S+.
I printed it with the tip of the nozzle on the bed plate with a brim and no supports.
The OG creator recommended PETG, but since this is larger and has more strength I used PLA and it worked great.
I used this to pump up both and air mattress and an exercise ball and it worked great with little air loss.