1 / 3
UNC 3/8" to Hot Shoe Joint for Microphone Arm — image 1
1 / 3

UNC 3/8" to Hot Shoe Joint for Microphone Arm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hot shoe adapter/joint for mounting hot shoe accessories to a 3/8" UNC thread - e.g. a microphone to a microphone arm

Rating
0 / 5
Likes
4
Downloads
27
Makes
0
Views
154
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is an adapter I made to connect my Røde Videomic Go II with a hot shoe mount to the Røde microphone arm using a 3/8" UNC thread.

It includes a joint with a thumbscrew to adjust the angle of the microphone.

 

Printing Instructions

Hot Shoe Model

Print on side, with the hot shoe opening facing upwards (as seen on picture).

 

Thumb Screw

Print on base (as seen on picture).
Important: Add a pause to the print at 13.6mm to drop in the hex nut.

 

Thread Side

Print on side of thread (as seen on picture). This ensures the compressive forces act perpendicular to the layers.

 

Required Hardware

  • 1 M6x30-35 hex head bolt
  • 1 M6 hex nut

 

Assembly

  1. Remove the bridging layer from the thumb screw (e.g. with a 6mm drill or by just pushing the bolt through)
  2. Slide the thread side print into the hot shoe side
  3. Push the M6 bolt through the center hole
  4. Screw on the thumb screw

 

Tags