Dremel 3000 + Flex Shaft Holder Bracket with ventilation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Accommodates flex shaft, screw-mounted bracket for horizontal or vertical mounting - ventilation for all ports included
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 54
- Makes
- 0
- Views
- 212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I wanted a holder that would clamp onto the Dremel, and allow for screw mounting either vertical or horizontal whilst the flex shaft is installed. I also noticed that some of the holders don't include ventilation for the rear of the dremel, so mine does.
You will need to turn on supports for this. 3 perimeters minimum. I printed in PLA but PETG is probably the better choice as the clamp must flex a little when tightened. You will need M4 nut and machine screw, 12-14mm plus a washer.
I used https://www.thingiverse.com/thing:4944801 as a negative to get the fit perfect on the Dremel.
If you like my designs, consider popping a tip on https://ko-fi.com/valentineinstruments - it helps out a lot!