Dell OptiPlex SFF PSU to ATX PSU Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter allows you to use the non-standard PSUs found in old Dell OptiPlexes inside a normal ATX case.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 105
- Makes
- 0
- Views
- 1,134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket allows you to use the power supply out of a Dell OptiPlex SFF computer in a case which takes a standard ATX one.
Despite its strange dimensions, its outputs conform to the ATX standard.
You'll need 7 screws; 4 to mount the bracket and 3 to mount the PSU to the bracket.
Chances are you'll also need a 24 pin extension as the default cable is very short.
Made in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues.
The 2nd photo was taken with a prototype model. The final bracket has all the screw holes in the right places.
If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.