Durable Wall Mount for Stihl FSA 57 Weed Eater – Space-Saving Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small wall mount for the FSA 57
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 133
- Makes
- 2
- Views
- 926
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
Small support for the weed eater. Does not take long to print and requires no supports. I have included the step file in case you need to modify for the screw size or else. I printed it in PETG since it will be in my garage during summer and the temperature may get too high for PLA. I printed with 5 walls, 25% infill, 0.24 layer height.
On my slicer I imported it as a 3MF file (included) and a two body item and printed the small support knob at 100% infill. Keep in mind that the whole weight of the weed eater rests on it so make sure you print with enough infill to make that part strong enough.
You can mount it directly to the wall but it will slightly be at an angle due to the plastic protection cover where the wire is spinning. If you want it to be straight up as per my picture you need to install the bracket at about 38mm (1.5") from the wall or modify the step file to fit.
You will need 2 screws and the current design has 5mm holes.