Modular Slime Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is my first model for the DIY Slime VR Tracker. I wasn't happy with other designs that I've tried before, and try doing a design myself. Please keep in mind that this model is W.I.P. and thereby not at all finished. My idea for this project was to make the tracker, one such thing was to make the charging station separate. I did this by using a cheap magnetic connector found on AliExpress(I will provide a link as soon as the model is ready). Doing this I achieved another goal of mine which was to minimize the amount of cables necessary for the trackers.
To give insight into the future of this project: I'm going to try and make a charging station for these trackers. This model is supposed to be used with the official Slime BNO085 boards, but they might be hard to come by. As time goes on, I want to upload the designs compatible with other trackers(i.e. BMI160, BMI270 or the LSM6DSV).
These trackers took a lot of time, so I hope you can enjoy them.
P.S: Feedback is encouraged, I want to improve in this design.
EDIT1:
I just updated the size of the holes for the filament strands that hold the magnetic connector. I also just built the first one and it works great! Hope you enjoy ^^