1 / 3
V2.0 Fanduct Driver Board mainboard Kobra S1 — image 1
1 / 3

V2.0 Fanduct Driver Board mainboard Kobra S1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

V2 Funduct for Mainboard / Driverboard / Powersupply Kobra S1

Rating
5 / 5
Likes
83
Downloads
352
Makes
6
Views
3,111
Reviews
4

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Hello

 

07.2025: V2 more robust and added a place for the original cables.

I have noticed that the fan for the power supply and driver board on the Anycubic S1 blows into the case in a very undirected manner. With this fan, the airflow is channelled directly onto the mainboard and into the power supply unit, thus improving cooling. I have designed it so that a larger fan with a depth of 25mm will also fit.

I measured the effect using a thermocouple on the stepper drivers!

It may also be possible to reduce the speed of the fan with the step-down module, for noise reduction, but this is at your own risk.

 

Print with PETG, ABS, ASA or similar ( just to be on the safe side )

Mount it with standard Fan screws

 

In case anyone is interessted: tested the temperatures with the origial fan at 16V and the Noctua R8 at 10V ( with the noctua even better temp )

 

Happy Printing!

Tags