1 / 3
V2.0 Fanduct Driver Board mainboard Kobra S1 — zdjęcie 1
1 / 3

V2.0 Fanduct Driver Board mainboard Kobra S1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

V2 Funduct for Mainboard / Driverboard / Powersupply Kobra S1

Ocena
5 / 5
Polubienia
83
Pobrania
350
Wydruki
6
Wyświetlenia
3097
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Hello

 

07.2025: V2 more robust and added a place for the original cables.

I have noticed that the fan for the power supply and driver board on the Anycubic S1 blows into the case in a very undirected manner. With this fan, the airflow is channelled directly onto the mainboard and into the power supply unit, thus improving cooling. I have designed it so that a larger fan with a depth of 25mm will also fit.

I measured the effect using a thermocouple on the stepper drivers!

It may also be possible to reduce the speed of the fan with the step-down module, for noise reduction, but this is at your own risk.

 

Print with PETG, ABS, ASA or similar ( just to be on the safe side )

Mount it with standard Fan screws

 

In case anyone is interessted: tested the temperatures with the origial fan at 16V and the Noctua R8 at 10V ( with the noctua even better temp )

 

Happy Printing!

Tagi