1 / 6
Loxodon, Elephantfolk Cleric 25mm (DND / TTRPG) — image 1
1 / 6

Loxodon, Elephantfolk Cleric 25mm (DND / TTRPG)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An Loxodon Cleric model for DND and other TTRPGs

Rating
0 / 5
Likes
9
Downloads
46
Makes
0
Views
136
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Here is a simple cleric Loxodon / Elephantfolk model although it could just as easily work as a wizard or sorceror or even a warlock or druid model - whatever you want :)! The trickiest part was sizing and positioning the staff so that it prints well and isn't a pain to clean supports off of without worrying about it snapping.

For this I did the usual thickening up and post processing to make sure it would print nicely.

I print using a 0.2mm nozzle at 0.08mm and 100% infill - usually with the models on their back (-90 degrees on the x axis) - in general, for best results, I would recommend using the version without a baseplate and then glueing the model to the baseplate but I print with the baseplate to show that it can be done.

Category: Other

Tags